202-318-5349
elogic@e-logic.us
1025 Connecticut Avenue N. W,
Suite 1000
Washington, D.C. 20036
Suite 1000
Washington, D.C. 20036
202-318-5349
elogic@e-logic.us
1025 Connecticut Avenue N. W,
Suite 1000
Washington, D.C. 20036
Suite 1000
Washington, D.C. 20036
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
AFI-4 Loudspeaker
Series: Contractor
Model: 106-0400
- Driver Complement: Low-Frequency: One Apogee 12" (305mm) neodymium magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters
- Also treated with Ferrofluid® for greater power handling capability, lower distortion, and control of short-term impedance rise
- High-Frequency: One Apogee 1.75" (45mm) voice coil, 1" (25mm) exit horn-loaded compression driver treated with Ferrofluid
- Input Connectors: Barrier strip, screw type #8
- Compatible Processors: AFI Main Frame Controller Chassis (using either AFI-4/-4B/-4W/- 4WB Modules) or DLC24
Product Info
Tech Specs
Documents
The AFI-4 is a fully arrayable loudspeaker versatile enough for clubs, discos, churches, theaters, and theme parks. Much of this versatility comes from the available options that include a 60° x 45° or 90° x 45° horn as well as bi-amplification capabilities. These horns, as well as their logo plate, are rotatable to allow alternative hanging positions.
- Driver Complement: Low-Frequency: One Apogee 12" (305mm) neodymium magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters
- Also treated with Ferrofluid® for greater power handling capability, lower distortion, and control of short-term impedance rise
- High-Frequency: One Apogee 1.75" (45mm) voice coil, 1" (25mm) exit horn-loaded compression driver treated with Ferrofluid
- Input Connectors: Barrier strip, screw type #8
- Compatible Processors: AFI Main Frame Controller Chassis (using either AFI-4/-4B/-4W/- 4WB Modules) or DLC24
- Recommended Crossover (AFI-4B only): Contact Apogee for full technical data on other DSP-based Processors
- Handles: Two handles – one top, one bottom – designed as an integral part of the enclosure (no moving parts)
- Grille: Highly durable, quality finish on perforated steel (aluminum on SX version)
- Rigging Hardware:Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8 inch-16 or M10 thread
- Finish: Textured high-strength black or white epoxy paint; other colors optional
- Enclosure Type: 30° trapezoidal, optimally-vented bass
- Cabinet Construction: Multi-ply hardwood
- Options/Accessories: AFI Controller Processor or DLC24 Digital Processor; SX weather treatment for use in limited exposure enclosures; assorted rigging components
- Loudspeaker Setup - Rigged
- Powered (Active) - Yes
- Spec Sheet available - Yes
- Speaker Diameter (Driver): 12 in
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 58 Hz
- Minimum Frequency Response (Bandwidth): 0.06 kHz
- Construction: Hardwood
- Coverage Horizontal: 60 degrees
- Coverage Vertical: 45 degrees
- Finish: Textured
- Impedance: 8 ohm
- Maximum SPL (Sound Pressure Level): 130 dB
- Power Handling (High Frequency): 1200 Watt
- Power Handling (Low Frequency): 300 Watt
- Sensitivity: 99 dB
- Depth: 12.10 in
- Height: 28.20 in
- Width: 15.30 in
- Product Weight: 53 lbs
- Finish: Textured high-strength black or white epoxy paint; other colors optional
- Format: Passive/Two-way
- Input Connectors: Barrier strip, screw type #8
- Enclosure Type: 30° trapezoidal, optimally-vented bass
- Grille: Highly durable, quality finish on perforated steel (aluminum on SX version)
- Handles: Two handles – one top, one bottom – designed as an integral part of the enclosure (no moving parts)
- Cabinet Construction: Multi-ply hardwood
- Compatible Processors: AFI Main Frame Controller Chassis (using AFI-4 Module) or DLC24
- Rigging Hardware: Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8 inch-16 or M10 thread
- PTML (peak transient mechanical limit): 138 dB
Loudspeaker
452673 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact E-Logic
close
E-Logic
1025 Connecticut Avenue N. W,
Suite 1000
Washington, DC 20036
USA
202-318-5349
https://e-logic.us/
Contact in regards to this product:
Bogen Communications, Inc.
Model: 106-0400
Request more information from a dealer near you
close
Request more information from a dealer near you