Speakers : Subwoofers : Bogen Communications, Inc. - 106-0900

AFI-118 Subwoofer with Barrier

Model: 106-0900

Driver Complement: Apogee 18 inch (460mm) permanent magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters
Input Connectors: Barrier strip, screw type #8
Recommended Crossover: Contact Apogee for full technical data on other DSP-based Processors
Handles: Two handles – one top, one bottom – designed as an integral part of the enclosure (no moving parts)
Grille: Highly durable, quality finish on perforated steel (aluminum on SX version)

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The AFI-118 features a high power, long excursion, 18" (460mm) cone driver capable of deep, rich, and extremely powerful bass. It works perfectly in combination with the AFI-8 or other AFI full-range speakers. The AFI-118 is superb for multi-media presentations, clubs, churches, discos, concert halls, and theaters.

Driver Complement: Apogee 18 inch (460mm) permanent magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters
Input Connectors: Barrier strip, screw type #8
Recommended Crossover: Contact Apogee for full technical data on other DSP-based Processors
Handles: Two handles – one top, one bottom – designed as an integral part of the enclosure (no moving parts)
Grille: Highly durable, quality finish on perforated steel (aluminum on SX version)
Rigging Hardware: Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8 inch-16 or M10 thread
Finish: Textured high-strength black or white epoxy paint; other colors optional
Enclosure Type: Rectangular, optimally-vented bass
Cabinet Construction: Multi-ply hardwood
Options/Accessories: AFI Controller Processor or DLC24 Digital Processor; SX weather treatment for use in limited exposure enclosures; assorted rigging components

Loudspeaker Setup - Rigged
Powered (Active) - Yes
Spec Sheet available - Yes

Speaker Diameter (Driver): 18 in
Maximum Frequency Response (Bandwidth): 70 Hz
Maximum Frequency Response (Bandwidth): 0.07 kHz
Minimum Frequency Response (Bandwidth): 35 Hz
Minimum Frequency Response (Bandwidth): 0.04 kHz
Finish: Textured
Impedance: 8 ohm
Maximum SPL (Sound Pressure Level): 132 dB
Power Handling: 2400 Watt
Sensitivity: 98 dB
Depth: 27.10 in
Height: 27 in
Width: 21 in
Product Weight: 97 lbs
Color: Black
Finish: Textured high-strength black or white epoxy paint; other colors optional
Format: Front Loaded
Input Connectors: Barrier strip, screw type #8
Enclosure Type: Rectangular, optimally-vented bass
Grille: Highly durable, quality finish on perforated steel (aluminum on SX version)
Handles: Two handles – one top, one bottom – designed as an integral part of the enclosure (no moving parts)
Cabinet Construction: Multi-ply hardwood
Compatible Processors: AFI Main Frame Controller Chassis (using AFI-118 Module) or DLC24
Rigging Hardware: Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8 inch-16 or M10 thread
PTML (peak transient mechanical limit): 154 dB

Subwoofer 289009 kb - Data Sheet

Project List

E-Logic
1025 Connecticut Avenue N. W,
Suite 1000
Washington, DC 20036
USA
202-318-5349

Contact in regards to this product:

Bogen Communications, Inc.

Model: 106-0900