Speakers : Loudspeakers : Bogen Communications, Inc. - AFI-4-WR

AFI-4 Passive Weather Resistant Black Series 2

Series: Contractor

Model: AFI-4-WR

Driver Complement: Low-Frequency: One Apogee 12" (305mm) neodymium magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters; also treate
High-Frequency: One Apogee 1.75" (45mm) voice coil, 1" (25mm) exit horn-loaded compression driver treated with Ferrofluid
Input Connectors: Barrier strip, screw type #8
Compatible Processors: AFI Main Frame Controller Chassis (using either AFI-4/-4B/-4W/- 4WB Modules) or DLC24
Recommended Crossover (AFI-4B only): Contact Apogee for full technical data on other DSP-based Processors

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The AFI-4 is a fully arrayable loudspeaker versatile enough for clubs, discos, churches, theaters, and theme parks. Much of this versatility comes from the available options that include a 60° x 45° or 90° x 45° horn as well as bi-amplification capabilities. These horns, as well as their logo plate, are rotatable to allow alternative hanging positions.

Driver Complement: Low-Frequency: One Apogee 12" (305mm) neodymium magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters; also treate
High-Frequency: One Apogee 1.75" (45mm) voice coil, 1" (25mm) exit horn-loaded compression driver treated with Ferrofluid
Input Connectors: Barrier strip, screw type #8
Compatible Processors: AFI Main Frame Controller Chassis (using either AFI-4/-4B/-4W/- 4WB Modules) or DLC24
Recommended Crossover (AFI-4B only): Contact Apogee for full technical data on other DSP-based Processors
Handles: Two handles – one top, one bottom – designed as an integral part of the enclosure (no moving parts)
Grille: Highly durable, quality finish on perforated steel (aluminum on SX version)
Rigging Hardware: Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8"-16 or M10 thread
Finish: Textured high-strength black or white epoxy paint; other colors optional
Enclosure Type: 30° trapezoidal, optimally-vented bass
Cabinet Construction: Multi-ply hardwood
Options/Accessories: AFI Controller Processor or DLC24 Digital Processor; SX weather treatment for use in limited exposure enclosures; assorted rigging components

Loudspeaker Setup - Rigged
Warranty - Yes
Spec Sheet available - Yes

Speaker Diameter (Driver): 12 in
Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 58 Hz
Minimum Frequency Response (Bandwidth): 0.06 kHz
Construction: Hardwood
Coverage Horizontal: 60 degrees
Coverage Vertical: 45 degrees
Finish: Textured
Impedance: 8 ohm
Maximum SPL (Sound Pressure Level): 120 dB
Power Handling (High Frequency): 1200 Watt
Power Handling (Low Frequency): 300 Watt
Sensitivity: 99 dB
Height: 32.50 in
Length: 18 in
Width: 20 in
Product Weight: 53 lbs
Color: Black
Format: Passive/Two-way
Dispersion: Rotatable
PTML (peak transient mechanical limit): 138 dB
Input Connectors: Barrier strip, screw type #8
Compatible Processors: AFI Main Frame Controller Chassis (using either AFI-4/-4B/-4W/-4WB Modules) or DLC24
Handles: Two handles – one top, one bottom – designed as an integral part of the enclosure (no moving parts)
Enclosure Type: 30° trapezoidal, optimally-vented bass

Loudspeaker 452673 kb - Data Sheet

Project List

E-Logic
1025 Connecticut Avenue N. W,
Suite 1000
Washington, DC 20036
USA
202-318-5349

Contact in regards to this product:

Bogen Communications, Inc.

Model: AFI-4-WR