Telephony & VoIP Systems : Telephone Interfaces : Bogen Communications, Inc. - UTI1

Single-zone Universal Telephone Interface

Model: UTI1

Single-zone paging
Telephone interfaces: loop start trunk, ground start trunk, station access (analog ring-up), page port contact closure activation, page port voice activation
Simple 2-switch interface setup
Override paging (using loop start trunk or page port contact closure activation)
Programmable activation of AUX contacts

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Accessories

Bogen’s UTI1 is a single-zone telephone interface that is compatible with all standard analog port types. A background music (BGM) input with variable muting coordinates music and page announcements. An additional audio output provides a “page only” function (no BGM) for application flexibility. A built-in 24V DC, 1A power supply is provided for powering amplified speakers. Paging volume controls are provided for each of the outputs. Contact-triggered tones and night ring signals, as well as programmable AUX relay contacts, are all programmed using DTMF tones through the dual-purpose override input.

Single-zone paging
Telephone interfaces: loop start trunk, ground start trunk, station access (analog ring-up), page port contact closure activation, page port voice activation
Simple 2-switch interface setup
Override paging (using loop start trunk or page port contact closure activation)
Programmable activation of AUX contacts
C-form contact
Two audio outputs (Page Only and Page with Background Music) both with level controls
Each output can provide audio drive for 150 selfamplified speakers
High impedance transformer-isolated background music input with volume control
Variable music mute
Night Ringer (contact closure activation)
Tone Trigger (tone and duration selectable, closureactivated)
Tone burst (2 to 7 sec), chime, and slow whoop tone selections
Pre-Announce/Confirmation Tone
Adjustable output limiter with threshold control and active indicator
Programmable timers control page duration (station and trunk)
DTMF programming
DTMF Block to help suppress DTMF tones over paging system
Non-volatile memory for setup data (no backup battery required)
Setup Tone to assist in volume setting
Pluggable terminal strips
Microcontroller-based operation
Wall mounting flanges
Rack panel kit with security cover available (RPKUTI1 sold separately)
Two-Year Warranty

Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): -112 F
AC Voltage: 120 Volts
Current Draw: 0.50 Amps
Depth: 2.50 in
Height: 5.25 in
Width: 12.25 in
Product Weight: 5 lbs
Warranty (Length/Type): 2 years
Input Impedance: 600 ohms (nominal)
Input Level: -10 dBm (nominal)
VOX Sensitivity: -30 dBm
BGM Input Impedance: 20 k ohms
Music Input Level: -10 dBm (nominal)
Output Level: -10 dBm (nominal)
Output Impedance: 8 ohms
Speaker Drive Capacity: 150
Timer Duration: Default: 10 to 990 S
VOX: 1 to 9 S
DC Output: 1 A @ 24V DC
Humidity: 0 to 85 % non-precipitating
Certifications: C-UL (UL60950); FCC Part 68 Registered; FCC Part 15 Compliant; Industry Canada CS-03

Datasheet for Single-Zone Universal Telephone Interface 166343 kb - Other

Project List

Interface 166955 kb - Data Sheet

Project List

Interface 432750 kb - Instructions

Project List

RPKUTI1
Rack Mount Kit and Security Cover

E-Logic
1025 Connecticut Avenue N. W,
Suite 1000
Washington, DC 20036
USA
202-318-5349

Contact in regards to this product:

Bogen Communications, Inc.

Model: UTI1